Wing Seal Systems

 

Image Product Name Features and Benefits Movement Capabilities

Available Joint Sizes 

 CR (NC) seal CR-Series

♦ For use in horizontal applications (traffic and/or pedestrian grade)
♦ Extruded shape made from an EPDM-based, thermo-rubber material (Santoprene) that can be easily heat-spliced making for seamless transitions from one piece of material to another
♦ Designed for parking decks and open-air structures
♦ Specifically designed for applications where maintaining a smooth walking surface is important
♦ A series of grooves across the top surface of the cross-section allows the seals to provide a virtually constant level surface during cyclic action
♦ Installed as a system with Polycrete Elastomeric Concrete
♦ Standard color: Black

+/- 50%

 

 

1.5" to 4"
      (38.1 mm to 103)                      

 DW-Shape      DW-Series                                    

♦ For use in horizontal applications (traffic and/or pedestrian grade)
♦ Extruded shape made from an EPDM-based, thermo-rubber material (Santoprene) that can be easily heat-spliced making for seamless transitions from one piece of material to another
♦ Designed for parking decks and open-air structures
♦ The membrane incorporates a center section with a heavy-duty web structure and integral edge flaps with factory-punched holes
♦ Specifically designed for applications where a smooth walking surface is required
♦ Due to the special action of the top (horizontal) and center (vertical) webs of the cross-section, the seals provide a nearly constantly level surface during cyclic action
♦ Installed as a system with Polycrete Elastomeric Concrete
♦ Standard color: Black

Size Dependent - Please see movement chart

1" to 3.50"

 (25.4 mm to 89)

 WM-200 F-F very good  detail      WM-Series                                                  

♦ For use in horizontal applications (traffic grade)
♦ Not recommended for appliactions where pedestrian traffic may be of concern (see CR-Series or DW-Series for pedestrian grade applications)
♦ Extruded shape made from an EPDM-based, thermo-rubber material (Santoprene) that can be easily heat-spliced making for seamless transitions from one piece of material to another
♦ Designed for parking decks and open-air structures, as well as buried joint applications where leak stoppage is critical
♦ The shape of the WM-Series is an appropriate selection for use where thin topping slabs require a proportionately shallow expansion joint profile
♦ Installed as a system with Polycrete Elastomeric Concrete
♦ Standard color: Black

Size Dependent - Please see movement chart  

1.75" to 3.25"

 (44 mm to 83)