Exterior Building Facades

Image	Product Name	Features and Benefits	Pre-Compressed?	Movement Capabilities	Available Joint Sizes
	CSS-Series	♦ For use in vertical application, typically for exterior building facades ♦ Permanently conforms to varying joint contours ♦ Does not rely on the silicone coating or the adhesion of a field applied bead of sealant to provide a watertight seal ♦ Excellent compression recovery due to seismic activity ♦ No thermal-set; material remains resilient and flexible down to -40° F temperatures. ♦ Available in Dow Corning ® 790 and Pecora 890 Colors: Actual Colors may vary. See Dow Corning ® 790 and Pecora 890 Color Chart for exact color match. ♦ Sizes available in 1/4” increments	YES	+/- 50%	1/2" to 12" (12.7 mm to 304.8)
	CSS(H)-Series	♦ To be used in non-pedestrian and non-traffic areas (i.e. stair towers) ♦ Supplied with two-part epoxy for installation in horizontal applications ♦ Can accommodate rapid rates of joint movement ♦ Consistent depth of product ♦ Excellent compression recovery ♦ Permanently elastic and weather-tight ♦ Available in Dow Corning ® 790 and Pecora 890 Colors: Actual Colors may vary. See Dow Corning ® 790 and Pecora 890 Color Chart for exact color match. ♦ Sizes available in 1/4” increments	YES	+/- 50%	1/2" to 12" (12.7 mm to 304.8)
	CSS(DS)-Series	♦ Typically used in vertical applications or non-pedestrian horizontal applications (with epoxy), along with difficult to reach areas, pre-cast panels, isolation joints, window frame closures, etc. ♦ Two-part epoxy supplied for installation in horizontal applications ♦ Double sided silicone facing allows for top/bottom aesthetics ♦ Permanently elastic and weather tight ♦ Available in Dow Corning ® 790 and Pecora 890 Colors: Actual Colors may vary. See Dow Corning ® 790 and Pecora 890 Color Chart for exact color match. ♦ Sizes available in 1/4" increments	YES	+/- 50%	1/2" to 8" (12.7 mm to 304.8)
	BS25-Series	♦ For use in horizontal or vertical applications ♦ Backer seal with +/- 25% movement ♦ Resists twisting and stretching during installation due to the Polyester Scrim in the PSA (Pressure Sensitive Adhesive) ♦ Paintable with water based paints ♦ Available in multiple colors - contact EMS for a color chart ♦ Sizes available in 1/4" increments	YES	+/- 25%	1/8" to 8" (3.3 mm to 203.2)
	BS50-Series	♦ For use in horizontal or vertical applications ♦ Backer seal with +/- 50% movement ♦ Resists twisting and stretching during installation due to the Polyester Scrim in the PSA (Pressure Sensitive Adhesive) ♦ Paintable with water based paints ♦ Available in multiple colors - contact EMS for a color chart ♦ Sizes available in 1/4" increments	YES	+/- 50%	1/8" to 6" (3.3 mm to 152.4)

Image

Product Name

Features and Benefits

Movement Capabilities

Available Plate Widths

EWJ-Series

♦ Best suited for vertical expansion joint openings, however it may also run across soffit areas
♦ The design features an elastomeric, primary seal locked into aluminum edge rails to follow the contour of the building structure
♦ To meet the waterproofing requirements of exterior applications, a double seal system is employed; a condensation moisture barrier seal provides waterproofing protection of the joint opening through all movement conditions
♦ Once the extruded aluminum frames are attached to the side walls, the seals easily snap-fit into the frames for ease of installation
♦ Seals can be heat-fused at directional changes to ensure weather-tight junctures
♦ Parapet transitions are factory produced to ensure a continuous weather barrier
♦ The primary visual seals are extruded from Santoprene (R) material which may be custom colored to coordinate with any building's facade. Standard colors include black, white, tan and gray. Please contact EMS for a color chart.

+/- 25% or +/- 50% (dependent on seal profile)

2" to 6"

(50.8 mm to 152.4)

Below, by product family, are various products that are suited for use in exterior building facades. Each of these products come in various colors that will match your building facade.

Foam Seal Systems

Miscellaneous Systems