♦ Adjustable high profile joint system primarily used in plaza deck and split slab applications
♦ Design is adjustable to height variances using a unique rail design
♦ Continuous seal coupled with the optional extended waterproof wings provide a monolithic seal
♦ Entire system may be fabricated to match various demands of field conditions including vertical and horizontal changes in plan

♦ Primarily used for split slab and plaza deck applications
♦ Adjustable to height variances using unique rail design
♦ Continuous foam seal coupled with the optional extended waterproof wings of the sealing element provide a monolithic seal
♦ Entire system may be factory fabricated to match various demands of field conditions including vertical and horizontal changes in plan
♦ Up to two (2) LEED credits available depending on the location of the project

(12.7 mm to 152.4)

♦ For use in horizontal or vertical applications
♦ Suitable for below grade applications
♦ The CSBG provides a watertight, dustproof, airtight, UV stable, chemically resistant, soundproof and insulated urethane primary seal.
♦ Made from a monolithic piece of foam that will not delaminate like multi-layer products
♦ Can be permanently bonded to the joint substrate
♦ Environmentally safe; no ChloroFluoroCarbons (CFCs)
♦ Sizes available in 1/4" increments

(12.7 mm to 304.8)

♦ For use in horizontal or vertical applications
♦ Composed of a durable, closed cell ethylene vinyl acetate (EVA) foam with factory applied NSF 61, Sec. 6 approved polysulfide coating
♦ Developed to perform under extreme conditions such as those found in DOT, water treatment and parking structure type expansion joints
♦ Not based on asphaltic or bitumastic impregnation
♦ Standard color: Gray
♦ Sizes available in 1/4" increments

1/2" to 8"

 (12.7 mm to 304.8)

♦ For use in horizontal or vertical applications
♦ Developed to perform in areas where a standard silicone faced sealant is vulnerable to vandalism
♦ Provides a watertight, dustproof, airtight, UV stable, chemically resistant, soundproof and insulated urethane primary seal.
♦ Provides a permanent, watertight seal allowing for a greater degree of joint movement
♦ Coated in a Pecora Pick-Resistant Silicone
♦ Sizes available in 1/4" increments

1/2" to 8"

 (12.7 mm to 304.8)

♦ Can accommodate rapid rates of joint movement
♦ Excellent compression recovery
♦ Permanently conforms to varying joint contours
♦ Allows for up to 100% (+/- 50%) movement from mean joint size
♦ Consistent depth of product
♦ Not based on asphaltic or bitumastic impregnation
♦ Resilient and flexible to -40*F (long term)
♦ Standard color: black, gray, dark gray
♦ Sizes available in 1/4" increments
♦ LEED Credits - Up to two (2) LEED credits depending on the location of the project

(12.7 mm to 152.4)

♦ System consists of an extruded elastomeric profile with extended membrane "wings" that are attached to the structure with aluminum retainer bars
♦ Unique design allows the seal to work in compression and tension
♦ LEED Credits - Up to two (2) LEED credits depending on the location of the project