Below Grade and Immersed Joints

Below, by product family, are various products that are suited for use in below grade and immersed applications. 

 

Foam Seal Systems

 

Image Product Name Features and Benefits

Pre-Compressed?

Movement Capabilities

Available Joint Sizes

CSBG CSBG-Series (Below Grade) ♦ For use in horizontal or vertical applications
♦ Suitable for below grade applications
♦ The CSBG provides a watertight, dustproof, airtight, UV stable, chemically resistant, soundproof and insulated urethane primary seal. 
♦ Made from a monolithic piece of foam that will not delaminate like multi-layer products
♦ Can be permanently bonded to the joint substrate
♦ Environmentally safe; no ChloroFluoroCarbons (CFCs)
♦ Sizes available in 1/4" increments
NO +/- 25%

1/2" to 12"

(12.7 mm to 304.8)

CSCR CSCR-Series (Chemically Resistant)  ♦ For use in horizontal or vertical applications
♦ Composed of a durable, closed cell ethylene vinyl acetate (EVA) foam with factory applied NSF 61, Sec. 6 approved polysulfide coating
♦ Developed to perform under extreme conditions such as those found in DOT, water treatment and parking structure type expansion joints
♦ Not based on asphaltic or bitumastic impregnation
♦ Standard color: Gray
♦ Sizes available in 1/4" increments
YES +/- 25%

1/2" to 8"

 (12.7 mm to 304.8)

 

 

Wing Seal Systems

Image Product Name Features and Benefits Movement Capabilities

Available Joint Sizes 

 CR (NC) seal CR-Series

♦ For use in horizontal applications (traffic and/or pedestrian grade)
♦ Extruded shape made from an EPDM-based, thermo-rubber material (Santoprene) that can be easily heat-spliced making for seamless transitions from one piece of material to another
♦ Designed for parking decks and open-air structures
♦ Specifically designed for applications where maintaining a smooth walking surface is important
♦ A series of grooves across the top surface of the cross-section allows the seals to provide a virtually constant level surface during cyclic action
♦ Installed as a system with Polycrete Elastomeric Concrete
♦ Standard color: Black

+/- 50%

 

 

1.5" to 4"
      (38.1 mm to 103)                      

 DW-Shape           DW-Series                                    

♦ For use in horizontal applications (traffic and/or pedestrian grade)
♦ Extruded shape made from an EPDM-based, thermo-rubber material (Santoprene) that can be easily heat-spliced making for seamless transitions from one piece of material to another
♦ Designed for parking decks and open-air structures
♦ The membrane incorporates a center section with a heavy-duty web structure and integral edge flaps with factory-punched holes
♦ Specifically designed for applications where a smooth walking surface is required
♦ Due to the special action of the top (horizontal) and center (vertical) webs of the cross-section, the seals provide a nearly constantly level surface during cyclic action
♦ Installed as a system with Polycrete Elastomeric Concrete
♦ Standard color: Black

Size Dependent - Please see movement chart

1" to 3.50"

 (25.4 mm to 89)

WM-200 F-F very good  detail         WM-Series                                    

♦ For use in horizontal applications (traffic grade)
♦ Not recommended for appliactions where pedestrian traffic may be of concern (see CR-Series or DW-Series for pedestrian grade applications)
♦ Extruded shape made from an EPDM-based, thermo-rubber material (Santoprene) that can be easily heat-spliced making for seamless transitions from one piece of material to another
♦ Designed for parking decks and open-air structures, as well as buried joint applications where leak stoppage is critical
♦ The shape of the WM-Series is an appropriate selection for use where thin topping slabs require a proportionately shallow expansion joint profile
♦ Installed as a system with Polycrete Elastomeric Concrete
♦ Standard color: Black

Size Dependent - Please see movement chart

1.75" to 3.25"

 (44 mm to 83)

Two-Part Epoxy Systems

 

Image Product Name Features and Benefits

Movement Capabilities

Available Joint Sizes

JP Drawing JP-Series ♦ Seal designed for use in parking garages 
♦ Can be used in pedestrian traffic areas (seal is ADA compliant)
♦ Includes an extruded elastomeric profile and a high-strength two-part epoxy-based structural adhesive
♦ The seal material is a high-quality, polychloroprene (neoprene) rubber
♦ Neoprene material meets ASTM D3542
♦ When inserted into joint, seals opening from the intrusion of water and debris
♦ Larger seals (greater than 2") are installed using a vacuum to depressurize and collapse the lower internal chambers, thereby facilitating ease of insertion

+/- 35%

 

 1" to 5"

   (25.4 mm to 127.0)                                                    

                    

J Series       J-Series  ♦ Seal designed for use in traffic grade areas (parking garages, airports, etc.)
♦ Not to be used where pedestrian traffic is a concern (not ADA compliant)
♦ Includes an extruded elastomeric profile and a high-strength two-part epoxy-based structural adhesive
♦ The seal material is a high-quality, polychloroprene (neoprene) rubber
♦ Neoprene material meets ASTM D3542
♦ When inserted into joint, seals opening from the intrusion of water and debris
♦ Larger seals (greater than 2") are installed using a vacuum to depressurize and collapse the lower internal chambers, thereby facilitating ease of insertion
 +/- 50%  

1" to 5"

 (25.4 mm to 127.0)