♦ COMPLEMENTARY SEAL COLORS: Available in four elastomeric seal color options: beige, white, gray, or black.
♦ QUICKER INSTALLATION: Reduce installation time and labor costs with fast and easy installation.

(25mm to 76)

♦ COMPLEMENTARY SEAL COLORS: Available in four elastomeric seal color options: beige, white, gray, or black.
♦ QUICKER INSTALLATION: Reduce installation time and labor costs with fast and easy installation.
♦ CONTINUOUS SIGHT LINE: This system can be used on walls, ceilings, and corners to provide seamless and continuous aesthetics.

1"

(25mm)

♦ COMPLEMENTARY SEAL COLORS: Available in four elastomeric seal color options: beige, white, gray, or black.
♦ QUICKER INSTALLATION: Reduce installation time and labor costs with fast and easy installation.

1" to 3"

(25mm to 76)

♦ MAXIMUM MOVEMENT: Deep “V” design allows for maximum thermal and seismic movement.
♦ COMPLEMENTARY SEAL COLORS: Available in four elastomeric seal color options: beige, white, gray, or black.
♦ CONTINUOUS SIGHT LINE: This system can be used on walls, ceilings and corners to provide seamless and continuous aesthetics.

2" to 24"

(51 mm to 610)

♦ MAXIMUM MOVEMENT: Deep “V” design allows for maximum thermal and seismic movement.
♦ DRYWALL BEAD FLANGE: Designed for drywall applications with punched holes for easy mounting. Mud is floated over top of flange and easily painted leaving only the seal exposed.
♦ COMPLEMENTARY SEAL COLORS: Available in four elastomeric seal color options: beige, white, gray, or black.

(51mm to 152)

♦ EASE OF INSTALLATION: Minimal components to reduce labor cost during installation
♦ CONTINUOUS SIGHT LINE: This system can be used on walls, ceilings and corners to provide seamless and continuous aesthetics

1" to 4"

(25mm to 102)

♦ COORDINATING CORNERS: Available with corner option for a complete solution.
♦ ARCHITECTURAL AESTHETICS: The sliding cover plate with a clear anodized finish provides a high-end appearance.
♦ CONTINUOUS SIGHT LINE: This system can be used on walls, ceilings and corners to provide seamless and continuous aesthetics.

2" - 3" : +/- 50%

1" to 3"

(25mm to 76)

♦ Permanently conforms to varying joint contours.
♦ Excellent compression recovery due to seismic activity.
♦ No thermal-set; material remains resilient and flexible down to -40° F temperatures.
♦ Ease of installation - Simply clean surface, peel off the protective tape and press into place.
♦ EMS provides a standard 5-year material warranty.
♦ Double the protection: The CSS material has twice the movement capabilities (+/- 50%) of the standard Contour Seal (CS) system.
♦ Available in Dow Corning ® 790 and Pecora 890 Colors: Actual Colors may vary. See Dow Corning ® 790 and Pecora 890 Color Chart for exact color match.
♦ Sizes available in 1/4” increments.

1/4" to 4"

(6.4mm to 101.6)

♦ For use in horizontal or vertical applications
♦ Developed to perform in areas where a standard silicone faced sealant is vulnerable to vandalism
♦ Provides a watertight, dustproof, airtight, UV stable, chemically resistant, soundproof and insulated urethane primary seal.
♦ Provides a permanent, watertight seal allowing for a greater degree of joint movement
♦ Coated in a Pecora Pick-Resistant Silicone
♦ Sizes available in 1/4" increments

(12.7 mm to 304.8)

♦ SEISMIC CENTERING BAR: System realigns itself with the self-centering bar, maintaining a safe, clean look.
♦ ARCHITECTURAL ELEGANCE: The clear anodized cover plate finish provides a high-end appearance.
♦ COORDINATING CORNERS: Available with corner option for a complete solution.

4" to 24"

(102mm to 610)

♦ COORDINATING CORNERS: Available with corner option for a complete solution.
♦ GASKETS: The assembly includes a gasket strip on either side to limit air flow in the joint.
♦ EASY ASSEMBLY: After base plates are attached to the wall, the cover assembly snaps together for a tight fit.

1" to 2"

(25mm to 51)

♦ EXTRA LARGE OPENINGS: For openings larger than 2 inches, this system is designed to accommodate with lateral shear.
♦ REDUCED AIR INFILTRATION: The assembly includes a gasket strip on both sides to limit air flow through the joint.

3" to 24"

(76mm to 610)

♦ SEISMIC MOVEMENT: This seismic system is engineered to accept lateral shear.
♦ COORDINATING CORNERS: Available with a corner option for a completion solution.
♦ COMPLEMENTARY SEAL COLORS: Available in four elastomeric seal color options: beige, white, gray or black

4" to 20"

(102mm to 508)

♦ MAXIMUM MOVEMENT: "V" seal design allows for maximum thermal and seismic movement.

♦ CONTINUOUS SIGHT LINE: This system can be used on wall, ceiling and corners to provide seamless and continuous aesthetics.

2" to 6"

(51 mm to 152)