Plazas

Image	Product Name	Features and Benefits	Pre-Compressed?	Movement Capabilities	Available Joint Sizes
	CSS-Series	♦ For use in vertical application, typically for exterior building facades ♦ Permanently conforms to varying joint contours ♦ Does not rely on the silicone coating or the adhesion of a field applied bead of sealant to provide a watertight seal ♦ Excellent compression recovery due to seismic activity ♦ No thermal-set; material remains resilient and flexible down to -40° F temperatures. ♦ Available in Dow Corning ® 790 and Pecora 890 Colors: Actual Colors may vary. See Dow Corning ® 790 and Pecora 890 Color Chart for exact color match. ♦ Sizes available in 1/4” increments	YES	+/- 50%	1/2" to 12" (12.7 mm to 304.8)
	CSS(H)-Series	♦ To be used in non-pedestrian and non-traffic areas (i.e. stair towers) ♦ Supplied with two-part epoxy for installation in horizontal applications ♦ Can accommodate rapid rates of joint movement ♦ Consistent depth of product ♦ Excellent compression recovery ♦ Permanently elastic and weather-tight ♦ Available in Dow Corning ® 790 and Pecora 890 Colors: Actual Colors may vary. See Dow Corning ® 790 and Pecora 890 Color Chart for exact color match. ♦ Sizes available in 1/4” increments	YES	+/- 50%	1/2" to 12" (12.7 mm to 304.8)
	CST-Series	♦ For use in horizontal applications, where there needs to be resistance to typical roadway traffic or chemicals found on roadways, bridges, garages, plaza decks and other areas that may be a concern ♦ Can accommodate rapid rates of joint movement ♦ Excellent compression recovery ♦ Does not rely on the silicone coating or the adhesion of a field applied bead of sealant to provide a watertight seal ♦ Permanently conforms to varying joint contours ♦ Consistent depth of product ♦ Not based on asphaltic or bitumastic impregnation ♦ Resilient and flexible to –40°F (long term) ♦ Standard Color: Gray ♦ Sizes available in 1/4” increments	YES	+/- 50%	1/2" to 6" (12.7 mm to 152.4)
	CST(DS)-Series	♦ For use in horizontal applications, where there needs to be resistance to typical roadway traffic or chemicals found on roadways, bridges, garages, plaza decks and other areas that may be a concern ♦ Double sided silicone facing allows for top/bottom aesthetics ♦ Resilient and flexible up to -40°F (long term) ♦ Standard color: Gray ♦ Sizes available in 1/4" increments	YES	+/- 50%	1/2" to 6" (12.7 mm to 152.4)
	BS25-Series	♦ For use in horizontal or vertical applications ♦ Backer seal with +/- 25% movement ♦ Resists twisting and stretching during installation due to the Polyester Scrim in the PSA (Pressure Sensitive Adhesive) ♦ Paintable with water based paints ♦ Available in multiple colors - contact EMS for a color chart ♦ Sizes available in 1/4" increments	YES	+/- 25%	1/8" to 8" (3.3 mm to 203.2)
	BS50-Series	♦ For use in horizontal or vertical applications ♦ Backer seal with +/- 50% movement ♦ Resists twisting and stretching during installation due to the Polyester Scrim in the PSA (Pressure Sensitive Adhesive) ♦ Paintable with water based paints ♦ Available in multiple colors - contact EMS for a color chart ♦ Sizes available in 1/4" increments	YES	+/- 50%	1/8" to 6" (3.3 mm to 152.4)
	CSBG-Series (Below Grade)	♦ For use in horizontal or vertical applications ♦ Suitable for below grade applications ♦ The CSBG provides a watertight, dustproof, airtight, UV stable, chemically resistant, soundproof and insulated urethane primary seal. ♦ Made from a monolithic piece of foam that will not delaminate like multi-layer products ♦ Can be permanently bonded to the joint substrate ♦ Environmentally safe; no ChloroFluoroCarbons (CFCs) ♦ Sizes available in 1/4" increments	NO	+/- 25%	1/2" to 12" (12.7 mm to 304.8)
	CSCR-Series (Chemically Resistant)	♦ For use in horizontal or vertical applications ♦ Composed of a durable, closed cell ethylene vinyl acetate (EVA) foam with factory applied NSF 61, Sec. 6 approved polysulfide coating ♦ Developed to perform under extreme conditions such as those found in DOT, water treatment and parking structure type expansion joints ♦ Not based on asphaltic or bitumastic impregnation ♦ Standard color: Gray ♦ Sizes available in 1/4" increments	YES	+/- 25%	1/2" to 8" (12.7 mm to 304.8)

Image

Product Name

Features and Benefits

Movement Capabilities

Available Joint Sizes

CR-Series

♦ For use in horizontal applications (traffic and/or pedestrian grade)
♦ Extruded shape made from an EPDM-based, thermo-rubber material (Santoprene) that can be easily heat-spliced making for seamless transitions from one piece of material to another
♦ Designed for parking decks and open-air structures
♦ Specifically designed for applications where maintaining a smooth walking surface is important
♦ A series of grooves across the top surface of the cross-section allows the seals to provide a virtually constant level surface during cyclic action
♦ Installed as a system with Polycrete Elastomeric Concrete
♦ Standard color: Black

+/- 50%

1.5" to 4"
(38.1 mm to 103)

DW-Series

♦ For use in horizontal applications (traffic and/or pedestrian grade)
♦ Extruded shape made from an EPDM-based, thermo-rubber material (Santoprene) that can be easily heat-spliced making for seamless transitions from one piece of material to another
♦ Designed for parking decks and open-air structures
♦ The membrane incorporates a center section with a heavy-duty web structure and integral edge flaps with factory-punched holes
♦ Specifically designed for applications where a smooth walking surface is required
♦ Due to the special action of the top (horizontal) and center (vertical) webs of the cross-section, the seals provide a nearly constantly level surface during cyclic action
♦ Installed as a system with Polycrete Elastomeric Concrete
♦ Standard color: Black

Size Dependent - Please see movement chart

1" to 3.50"

(25.4 mm to 89)

Image

Product Name

Features and Benefits

Movement Capabilities

Available Joint Sizes

JP-Series

♦ Seal designed for use in parking garages
♦ Can be used in pedestrian traffic areas (seal is ADA compliant)
♦ Includes an extruded elastomeric profile and a high-strength two-part epoxy-based structural adhesive
♦ The seal material is a high-quality, polychloroprene (neoprene) rubber
♦ Neoprene material meets ASTM D3542
♦ When inserted into joint, seals opening from the intrusion of water and debris
♦ Larger seals (greater than 2") are installed using a vacuum to depressurize and collapse the lower internal chambers, thereby facilitating ease of insertion

+/- 35%

1" to 5"

(25.4 mm to 127.0)

EOS-Series

♦ Typically used to seal most types of small movement expansion joints in parking garages, stadiums, plazas, and other types of concrete structures
♦ Can be used in pedestrian traffic areas (seal is ADA compliant)
♦ Seal may be used in the inverted position as a backer rod to support and seal a caulked joint
♦ Installed using high-strength two-part epoxy adhesive

Size Dependent - Please see movement chart

1" to 5"

(25.4 mm to 127.0)

Image

Product Name

Features and Benefits

Movement Capabilities

Available Joint Sizes

AR-Series

♦ This product is an extruded, elastomeric seal that will seal an expansion or contraction joint opening from the intrusion of water and debris
♦ Designed for constant compression throughout the range of joint movement
♦ Made of neoprene material that can be easily glue-spliced
♦ Installed as a system with a lubricant-adhesive that conforms to ASTM D4070
♦ Standard color: Black

Size Dependent - Please see movement chart

1.50" to 4"

(38.1 mm to 103.4)

Image	Product Name	Features and Benefits	Movement Capabilities	Available Joint Sizes
	DD-Series	♦ Designed to be used in split slab and plaza deck applications ♦ Features a preformed sealing element affixed to aluminum rails and clamped tightly by formed plates ♦ Can be used with our Polycrete elastomeric system, pavers or other substrate materials ♦ Once installed, this system provides a watertight seal, while flexing in response to changes in joint width ♦ The sealing element is extruded from a thermo-rubber material, which can be heat-fused to seal directional changes	Approx. +/- 55%	2.75" (69.9 mm)
	DD-HP Series	♦ Designed to be used in split slab and plaza deck applications ♦ High profile joint system that is adjustable to height variances using a rail design; adjustments in elevations may be compensated for in the field to match existing conditions ♦ The continuous seal coupled with the sealing element provide a monolithic seal ♦ The unique design of the aluminum edge rail system insures proper alignment and rigidity of the system; the overlap of the top rails at the splice locations bridge the bottom aluminum extrusions which provides the system with stability and uniformity in width of joint opening ♦ The entire system may be factory fabricated to match various demands of field conditions including horizontal/vertical changes in plane ♦ Can be used with our Polycrete elastomeric system, pavers or other substrate materials	Approx. +/- 55%	2.75" (69.9 mm)
	CSP-Series	♦ Designed to be used in split slab and plaza deck applications ♦ High profile joint system that is adjustable to height variances using a rail design; adjustments in elevations may be compensated for in the field to match existing conditions ♦ System includes a fabricated foam seal made from a high density, open micro-cell polyurethane foam, impregnated with a hydrophobic polymer sealing agent ♦ The unique design of the aluminum edge rail system insures proper alignment and rigidity of the system; the overlap of the top rails at the splice locations bridge the bottom aluminum extrusions which provides the system with stability and uniformity in width of joint opening ♦ The entire system may be factory fabricated to match various demands of field conditions including horizontal/vertical changes in plane ♦ Can be used with our Polycrete elastomeric system, pavers or other substrate materials	+/- 50%	1/2" to 6" (12.7 mm to 152.4)

Image

Product Name

Features and Benefits

Available Plate Widths

ALCP-Series

♦ Bridges the joint gap with minimal preparation for maximum protection
♦ Recommended areas includes warehouses, manufacturing facilities, retail spaces and stock rooms, where the finished floor is concrete.
♦ Made from 6061-T5 aluminum alloy that is secured on one side of the floor by pre-drilled, countersunk holes, anchored into the concrete; the anchors are then set into a bed of epoxy adhesive to assure a sound anchor
♦ Tested to ASTM D-1399 for 500 cycles of compression, tension and deflection
♦ Optional accents such as color anodize and EPDM-looped moisture barriers are available
♦ The ALCP-Series is tested to ADA compliance
♦ 14" plate (ALCP-600) is available for traffic grade applications

6" to 14"

(152.4 mm to 355.6)

ALHCP-Series

♦ Bridges the joint gap with minimal preparation for maximum protection
♦ The hinged feature allows for differences in height and movement between the floor slabs
♦ Made from 6061-T5 or 6063-T6 aluminum alloy that is secured on one side of the floor by pre-drilled, countersunk holes anchored into the concrete. The anchors are set into a bed of epoxy adhesive to assure a sound anchor
♦ Tested to ASTM D-1399 for 500 cycles of compression, tension and deflection
♦ Optional accents such as color anodize and EPDM-looped moisture barriers are available
♦ The ALHCP-Series is tested to ADA compliance
♦ Available for both floor-to-floor or floor-to-wall applications

Floor-to-Floor:
8" to 19.8"
(203.2 mm to 502.9)

Floor-to-Wall:
5" to 11"
(127.0 mm to 279.4)

Image

Product Name

Features and Benefits

Movement Capabilities

Available Plate Widths

FG-Series

♦ The FG-Series (flexible gutter) system is ideal for rehabilitation work; quickly put into place under expansion joint locations to direct water away from vehicles and occupied space below
♦ This system incorporates a 60-mil. neoprene sheet, which is securely anchored to the concrete structure under an expansion joint system
♦ The membrane can be attached to the underside of a joint location using metal retainer bars, or it can be attached directly to the side walls of the expansion joint opening for larger expansion joints
♦ Maintains its flexibility in temperatures ranging from -40° F to 220° F
♦ Rolls of material are available in 50 LF lengths and may be spliced to accommodate larger runs

Please see movement chart for total size movements

Available membrane width:

12" to 48"
(304.8 mm to 1219.2)

Below, by product family, are various products that are suited for use in plaza projects.

Foam Seal Systems

Wing Seal Systems

Two-Part Epoxy Systems

Pre-Formed Compression Seals

Plaza Deck Systems

Cover Plates

Miscellaneous Systems