| Image |
Product Name |
Features and Benefits |
Pre-Compressed? |
Movement Capabilities |
Available Joint Sizes |
 |
CSP-Series |
♦ Primarily used for split slab and plaza deck applications
♦ Adjustable to height variances using unique rail design
♦ Continuous foam seal coupled with the optional extended waterproof wings of the sealing element provide a monolithic seal
♦ Entire system may be factory fabricated to match various demands of field conditions including vertical and horizontal changes in plan
♦ Up to two (2) LEED credits available depending on the location of the project |
YES |
+/- 50% |
1/2" to 6"
(12.7 mm to 152.4) |
 |
CSBG-Series (Below Grade) |
♦ For use in horizontal or vertical applications
♦ Suitable for below grade applications
♦ The CSBG provides a watertight, dustproof, airtight, UV stable, chemically resistant, soundproof and insulated urethane primary seal.
♦ Made from a monolithic piece of foam that will not delaminate like multi-layer products
♦ Can be permanently bonded to the joint substrate
♦ Environmentally safe; no ChloroFluoroCarbons (CFCs)
♦ Sizes available in 1/4" increments |
NO |
+/- 25% |
1/2" to 12"
(12.7 mm to 304.8) |
 |
CSCR-Series (Chemically Resistant) |
♦ For use in horizontal or vertical applications
♦ Composed of a durable, closed cell ethylene vinyl acetate (EVA) foam with factory applied NSF 61, Sec. 6 approved polysulfide coating
♦ Developed to perform under extreme conditions such as those found in DOT, water treatment and parking structure type expansion joints
♦ Not based on asphaltic or bitumastic impregnation
♦ Standard color: Gray
♦ Sizes available in 1/4" increments |
YES |
+/- 25% |
1/2" to 8"
(12.7 mm to 304.8)
|
 |
CSBHT-Series |
♦ Can accommodate rapid rates of joint movement
♦ Excellent compression recovery
♦ Permanently conforms to varying joint contours
♦ Allows for up to 100% (+/- 50%) movement from mean joint size
♦ Consistent depth of product
♦ Not based on asphaltic or bitumastic impregnation
♦ Resilient and flexible to -40*F (long term)
♦ Standard color: black, gray, dark gray
♦ Sizes available in 1/4" increments
♦ LEED Credits - Up to two (2) LEED credits depending on the location of the project |
YES |
+/- 50% |
1/2" to 6"
(12.7 mm to 152.4) |
 |
CSPR-Series (Pick Resistant) |
♦ For use in horizontal or vertical applications
♦ Developed to perform in areas where a standard silicone faced sealant is vulnerable to vandalism
♦ Provides a watertight, dustproof, airtight, UV stable, chemically resistant, soundproof and insulated urethane primary seal.
♦ Provides a permanent, watertight seal allowing for a greater degree of joint movement
♦ Coated in a Pecora Pick-Resistant Silicone
♦ Sizes available in 1/4" increments |
YES |
+/- 25% |
1/2" to 8"
(12.7 mm to 304.8)
|
 |
CSQT-Series |
♦ Permanently elastic and protects against air, dust and sound transfer
♦ Resists stretching and twisting during installation due to the Polyester scrim in the PSA (Pressure Sensitive Adhesive)
♦ Made from a monolithic piece of foam that will not delaminate like multi-layer products
♦ Consistent depth of product
♦ Used for joints up to 6” wide
♦ Not based on asphaltic or bitumastic impregnation
♦ Available in Dow Corning (R) 790 and Pecora 890 Colors: Actual colors may vary. See Dow Corning 790 and Pecora 890 color charts for exact match or contact EMS for a sample swatch.
♦ Sizes available in 1/4” increments
♦ LEED Credits - Up to two (2) LEED credits depending on the location of the project. |
NO |
Adapts to width of joint |
1/2" to 6"
(12.7 mm to 152.4) |
