Pre-Compressed?

Available Joint Sizes

♦ For use in vertical application, typically for exterior building facades 
♦ Permanently conforms to varying joint contours
♦ Does not rely on the silicone coating or the adhesion of a field applied bead of sealant to provide a watertight seal
♦ Excellent compression recovery due to seismic activity
♦ No thermal-set; material remains resilient and flexible down to -40° F temperatures.
♦ Available in Dow Corning ® 790 and Pecora 890 Colors: Actual Colors may vary. See Dow Corning ® 790 and Pecora 890 Color Chart for exact color match.
♦ Sizes available in 1/4” increments

YES

1/2" to 12"

     (12.7 mm to 304.8)  

1/2" to 12"

 (12.7 mm to 304.8)

1/2" to 6"

(12.7 mm to 152.4)

1/8" to  8" 

(3.3 mm to 203.2)

1/8" to 6"

(3.3 mm to 152.4)

Available Joint Sizes 

♦ For use in horizontal applications (traffic and/or pedestrian grade)
♦ Extruded shape made from an EPDM-based, thermo-rubber material (Santoprene) that can be easily heat-spliced making for seamless transitions from one piece of material to another
♦ Designed for parking decks and open-air structures
♦ Specifically designed for applications where maintaining a smooth walking surface is important
♦ A series of grooves across the top surface of the cross-section allows the seals to provide a virtually constant level surface during cyclic action
♦ Installed as a system with Polycrete Elastomeric Concrete
♦ Standard color: Black

1.5" to 4"
      (38.1 mm to 103)                      

♦ For use in horizontal applications (traffic and/or pedestrian grade)
♦ Extruded shape made from an EPDM-based, thermo-rubber material (Santoprene) that can be easily heat-spliced making for seamless transitions from one piece of material to another
♦ Designed for parking decks and open-air structures
♦ The membrane incorporates a center section with a heavy-duty web structure and integral edge flaps with factory-punched holes
♦ Specifically designed for applications where a smooth walking surface is required
♦ Due to the special action of the top (horizontal) and center (vertical) webs of the cross-section, the seals provide a nearly constantly level surface during cyclic action
♦ Installed as a system with Polycrete Elastomeric Concrete
♦ Standard color: Black

1" to 3.50"

 (25.4 mm to 89)

Movement Capabilities

Available Joint Sizes

+/- 35%

 1" to 5"

   (25.4 mm to 127.0)                                                    

1" to 5"

 (25.4 mm to 127.0)

Available Joint Sizes 

♦ For use in vertical applications
♦ Available in 1, 2 or 3 hour fire ratings
♦ Product features waterproof silicone faces on each side of a fire-retardant impregnated foam sealant, without the need for an additional set of intumescent bellows
♦ Designed to be used alone, but can be used behind any other expansion joint cover, plate or filler where joint depth allows
♦ Depending on the application, this product can be supplied un-coated or coated on one or both sides. Un-coated material is to be used in enclosed applications only
♦ Pick resistant urethane faces can be used in applications where vandalism is a concern
♦ Sizes available in 1/4” increments 
♦ Available in Dow Corning ® 790 and Pecora 890 Colors: Actual Colors may vary. See Dow Corning ® 790 and Pecora 890 Color Chart for exact color match. 

+/- 25% or +/- 50% based on UL listing

1/2" to 6"

            (12.7 mm to 152.4)                                                                                       

♦ For use in horizontal applications; designed for expansion joints in decks and floors where water-tightness, fire-rating and traffic durability are required
♦ Product features waterproof silicone faces on each side of a fire-retardant impregnated foam sealant, without the need for an additional set of intumescent bellows
♦ No additional fire blankets, mineral wool, liquid sealants or cover plates are required, although they can be used with the joint system
♦ Depending on the application, this product can be supplied un-coated or coated on one or both sides. Un-coated material is to be used in enclosed applications only
♦ Sizes available in 1/4” increments
♦ Standard color: Gray

1/2" to 4" (2 hr. rating)

          (12.7 mm to 101.6)                

1/2" to 5" (3 hr. rating)  

          (12.7 mm to 127)                                           

♦ The FB-Series system is adaptable to many applications and can be used with most of the EMS expansion joint products
♦ Has been tested to ensure compliance with various building design codes. The product carries ratings in compliance with U.L. testing as well as ISO Certification schedule for a two-hour rating
♦ The FB system has the ability to protect the application with a 50% lateral shear capacity
♦ Rolls of the product are accompanied by galvanized, bent metal flanges, which securely anchor the stainless steel and ceramic fiber fire blanket package

 1" to 20" 

(25.4 mm to 508.0)

♦ Adaptable to many applications and can be used with most of the EMS expansion joint products 
♦ The Ultra Block (R) (UB-Series) fire stop system is a pre-engineered, patented, flexible textile fiberglass roll material with a fiberglass matte facing, containing approximately 30% by weight unexpanded vermiculite which expands when exposed to heat
♦ When used together with an approved sealant, it will provide a 2, 3 or 4 hour fire rated joint system as designated by design configuration
♦ When exposed to fire on the caulked and un-caulked side, there is no passage of destructive heat to the sealant bead on the opposite side
♦ Tested to various standards including UBC, BOCA, SBCCI, ASTM and NFPA.

 2" to 7"

(50.85 mm to 177.8)

Available Plate Widths 

♦ Bridges the joint gap with minimal preparation for maximum protection 
♦ Recommended areas includes warehouses, manufacturing facilities, retail spaces and stock rooms, where the finished floor is concrete. 
♦ Made from 6061-T5 aluminum alloy that is secured on one side of the floor by pre-drilled, countersunk holes, anchored into the concrete; the anchors are then set into a bed of epoxy adhesive to assure a sound anchor
♦ Tested to ASTM D-1399 for 500 cycles of compression, tension and deflection
♦ Optional accents such as color anodize and EPDM-looped moisture barriers are available
♦ The ALCP-Series is tested to ADA compliance
♦ 14" plate (ALCP-600) is available for traffic grade applications

6" to 14"

               (152.4 mm to 355.6)                                                                                       

♦ Bridges the joint gap with minimal preparation for maximum protection 
♦ The hinged feature allows for differences in height and movement between the floor slabs
♦ Made from 6061-T5 or 6063-T6 aluminum alloy that is secured on one side of the floor by pre-drilled, countersunk holes anchored into the concrete. The anchors are set into a bed of epoxy adhesive to assure a sound anchor
♦ Tested to ASTM D-1399 for 500 cycles of compression, tension and deflection
♦ Optional accents such as color anodize and EPDM-looped moisture barriers are available
♦ The ALHCP-Series is tested to ADA compliance
♦ Available for both floor-to-floor or floor-to-wall applications

Floor-to-Floor: 
8" to 19.8"
(203.2 mm to 502.9)

Floor-to-Wall:
5" to 11"
(127.0 mm to 279.4)